Atola TaskForce 2 technical specs
Drive ports
26 drive ports
- 8 SATA (up to 540 MB/s)
- 8 SAS/SATA (up to 1000 MB/s)
- 4 NVMe M.2/U.2/U.3 PCIe 4.0 (up to 6000 MB/s)
- 4 USB (up to 400 MB/s)
- 1 IDE (up to 100 MB/s)
- 1 Extension
Drive port features
- Physical source/target switch with LED indication
- Hardware write protection in the source mode
- Task status LED indication
- Full low-level control over drive ports
- Reset and SATA PHY control for the best handling of severely damaged hard drives
Drive's power control
- Current sensor
- Automatic overcurrent protection
- Automatic short-circuit protection
- Overvoltage protection
Supported drive interfaces
- M.2 / U.2 / U.3 NVMe
- SATA I/II/III
- SAS3 (12 Gb)
- USB 2.0/3.x
- IDE
- Flash cards via a card reader attached to any USB port
- Other interfaces supported via Extension modules (see below)
Network
- Two 10Gb Ethernet ports for imaging to a network server or NAS.
- Optionally: two 25Gb SFP28 ports via Atola 25G Fiber extension.
- WiFi 802.11n 150 Mb/s adapter in access point mode. Included in the package.
CPU, motherboard, and RAM
- Xeon CPU with 16 cores
- Server-grade Supermicro motherboard
- 16 GB ECC RAM
Extension modules
- 25G Fiber
- Apple PCIe
- FireWire
- Thunderbolt 2 and 3 (2016-2017 models)
- M.2 NVMe/PCIe/SATA
Indication
Power LED indicator
Signals that hardware is up and running
Color-coded port LEDs
Indicate that a task is running or finished, a process is OK or there are issues
IP display
OLED (20x2 characters). Shows an IP address to connect to the TaskForce 2 user interface or Kiosk mode
Auxiliary connections
Kiosk mode
- VGA port
- Two USB ports for connecting a keyboard and mouse
Database
- Two DB USB 3.0 ports for connecting a USB flash media as database storage
- Serial RS232 port
- Fan power port
- System SD card slot for boot drive
Power
Power consumption
190 Watt average, 550 Watt peak
Supply voltage
100–240 VAC, 50–60 Hz
Power supply
- Internal power supply
- IEC 60320 C14 power inlet
- Power supply switch on the back panel
Size, weight, and temperature
Aluminum case
Dimensions
- 17.4 x 14.5 x 3.9 in (442 x 370 x 100 mm)
- Required server rack height: 2.5U
Weight
17.2 lb (7.8 kg)
Working temperature
32° – 95°F (0°C – 35°C)
Lifetime warranty
TaskForce 2 hardware is covered by our Lifetime warranty, for as long as your software update subscription is active.
If you have an active subscription, you can request free replacement of a device, component, extension module, or cable, as well as free training and technical support.
