Imaging an evidence drive to 3 targets

If you need to create multiple images of a drive for different purposes, with Insight you can image to three targets simultaneously. The targets can be of different types: another drive, an E01 (RAW, img, dd) file located on a server/workstation.

1. Click Imaging in the left-side menu
2. Click Create new session link
3. Select the target drives you want to image to and click Select button

Select target drives

If one of the targets has to be a file, follow these steps:

1. Click Create Image File link in the Target Device Selection window.

Select target drives

2. Select file location, name and format, then click Open button.

Select target drives

3. Once you have selected all targets, click Select button.

Select target drives

4. Double-check imaging settings and click Start Imaging button.

NB The speed of this imaging session will depend on the slowest of the devices involved in it: either on the read speed of the source drive or the write speed of the targets you have selected.

Select target drives

Back to Manual start page